1. Select the folder of photo.

2. This area shows photos from the folder selected for your preview.

3. This area shows photos selected for uploading or GeoTagging.

4. Track Data Area：You can copy the geographic information from one track point by clicking right key of mouse, and paste it to the photo (including some photos in RAW format) selected in area 3 by right key of mouse, too.

5. Operating menu.

    Photo：Look for photos in the computer, and select them to area 3 for some operations.

    Track：Select the track you want to operate and double click the left key of mouse  for Auto-Geotagging to area 3.

    Google Earth：Make the KMZ file according to 3＆4.

    Locr：Upload photos from 3 to Locr

1. Select photos in “Photo” tab.  You can double click the left key of mouse on the photo you want to select or use the right key function, and then selected photos would be shown in this area.

2. Change to “Track” tab.   Select a track file and double click the mouse, the Auto-Geotagging works.

3. This diagram means that 7 photos’ GPS info (from the area 1) can be matched with the selected track, in another word, these 7 photos are taken during the time of the selected track.  At the same time, the TimeMachineX will write the Geographic information in photos.

1. For manual Geo-Tagging, select the track point in “Track Data” area is the first step.

2. Get geographic information from track point by right key function.

 

1. Select the photo in the area of “Selected Photos” that you want to write the geographic information in (you can select more than one simultaneously).

2. Paste the geographic information to photos by right key function. (The geographic information is shown as the line under 2 in above picture )

 

If the photo format you want to write in is not JPG, for instance, the NEF file of RAW format from NIKON, please follow below steps.

1. Use right key function and select the item of “Try Geotag To Extra Photo”.  The window shown as below will show up.

1. Select the photo file in NEF.

2. Press the button of “Open”.  And TimeMachineX needs 5～10 seconds to write the geographic information in.

If Geo-Tag successfully, the following picture will show up.  You can see the geographic information is written in the photo.

1. The selected photos.

2. The track point from the selected track.

3. Set the showing style of track.

4. Make the KMZ file with photos only.

5. Make the KMZ file integrated with photos and track

6. Make the KMZ file with track only.

7. In the completed KMZ file, pictures provided in files start with letter “P”, the track included with letter “T”, and both the picture and track offered with letter “PT”.

1. Make sure if there are photos in area 1.

2. Key in your Locr ID and Password.

3. If you haven’t registered it before, Press the “Sign Up” button to register.

4. Select where you want to put your photos.

5. Press the “Upload Photo To Locr” button for uploading：The time of process depends on your bandwidth of network.

6. You can press the “Go to Locr” button to see you photos when the uploading is completed.