Track Editor

Track Editor

Step 1 ： Focus on the editing of the file of TK2 format. Select the file you want to edit and double click the left key of mouse.

And then the Step 2 will show up.

1. Track Diagram：You can enlarge or minify the track diagram and save it. If you want to delete or edit the track points, please make the cursor stopping in the point you want to modify, the right side points table should stop in the same point simultaneously, click the right key, and then the delete list will show up. You also can double click the left key and enter Step 3 to modify the track points. In addition, click the left key for zoom in the map and click the right key for zoom out the map.

2. You can directly modify the digits of Latitude, Longitude and Altitude by click the values on the points table. Also you can click the right key for deleting the point or double click the left key for entering Step 3 to modify the track points.

3. You can delete all points that you want to cancel via the conditions of acceleration, Attitude, Speed limit and Heading Angle. If there is no suitable value for selection, you also can key in it by yourself.

4. The revised track can be saved or saved as.

When you select a track point and double click the left key, the following window will be shown up.

1. Select the point you want to modify and drag to the correct position.

2. Press the “Confirm” button for completing the modification.

#Remark：Please be aware when you complete all modifications, don’t forget to save the new track diagram by pressing the save button in the window of Step 2.

Report Function

1. The map information (Google Maps) can be keyed in Google Map API Key here.

2. Select a track you want to have the report and double click the left key.

Now you can review and check the track information item by item as following.

The above picture can review the overall analysis and the detail information of each point.

1. The track information is shown on the map.

2. Some introductions can be keyed in here.

3. Some comments can be keyed in here.

4. Select here if you want to put the part 1,2,3 to the report.

There are no big difference in tabs of Track, Spd.+Alt.+T, Spd.+Heading+Point, Spd.+Dist.+Journey, Alt.+Dist.+T, Speed and Vector Track.

See the example picture given above, it is the analytic diagram of attitude, distance and time.

The last tab “Make Report” (please refer to below picture) is the function for making report.

1. This area is for adding the marker to the track.

2. This area shows the marker and track.

3. The information about the added marker.

4. Make and save the report.

How to add photos to Google Maps?

First of all, please make sure that you have had a space (account) in locr.com and uploaded photos there.

Secondly, you can link to locr.com, find out the photo needed and copy the link of photo (please refer to the following).

For Firefox Browser

1. When you use the Firefox Browser, click the right key on the photo shown on web page and then the function list will pop out.

2. Select the item of “copy the photo link”.

For IE Browser

1. Click the right key on the photo shown on web page and then the function list will pop out.

2. Select the item of“Content”.

3. Select the item of URL of photo.

4. Click right key and select the item of “copy”.

After that, back to the TimeMachineX and past the link to position 3 as following.

1. The TimeMachineX will treat the center location of the track as a default latitude and longitude, or you can key in those information by yourself. If there is geographic information in the picture on the web page, you also can press the “Get GeoTag From URL” button 7 to get the latitude and longitude.

2. There are three types for adding the markers in Google Maps：

    a. Add photo：Copy the link and past into the blank of URL 3 or Photo Linker URL 4, and the link is not restrict to photos only.
    b. Add Text Description：Display by text only.
    c. Add HTML：Use some wording of HTML. For instance, you can visit the website of YouTube, copy the embed of a video and paste it here 12.（How to copy the HTML? Please refer to following picture.)

You can compose of above three types by your preference.

3. Paste the link of the photo you want to show here.

4. The address link when you select the photo. It could be a photo or a Website.

5. Key in the title of the photo here.

6. Choose the size of the photo.

7. If the photo includes the geographic information, you can get it by pressing the “Get GeoTag From URL” button to replace the latitude and longitude in item 1.

8. The space for showing the photo.

9. When you complete all information of markers, you can press the button of “Check Marker” to see if it is okay.

10. If all information is correct and then you can press the button of “Add Marker” for making a report.

11. Key in some descriptions if you want.

12. Use the wording of HTML：You can copy an embed of a video in YouTobe’s Website, and paste it here. The content of the embed is using the wording of HTML.

After completing above steps, you can continue making the report. Please refer to following picture.

1. Press the button of “Make HTML Report” and then the button of “Report Save As” will show up. At this moment, the TimeMachineX will start to make a report, and show the completed report in browser as following picture.

2. Press the button of “Report Save As” and choose the folder you want to set, now the report has been saved completely. The contents are shown as below.

1. Please refer to the above picture; the square1 is the htm file of the report. You can e-mail the whole folder to your friend or save it for analyzing, recalling, sharing…… etc.

2. Please refer to the above picture; the folder of square2 makes you quickly embed the Google Maps to your blog. The content is shown as below:

You can put above three files into a certain Web space, and then use the similar sentence to following one to embed the Google Maps to Blog.

For example, upload files to Google Pages first. Please refer to following picture.

1. Upload those three files located in BLOG folder into a network via Web page.

2. Look up and copy the site of the Web.

3. The site of the GM.html.

After copying the above-mentioned Web link and then get into your own blog.

1. Please write in into the blog by HTML sentences.

2. Paste the Web link in the sentence as following, you also can modify the width and height by your preference.

http://lai0330.googlepages.com/GM.html this Web link will be changed by what you key in.

3. Press the button of “PUBLISH POST” and you will see that the Google Maps has been embedded to your Blog. Please refer to following picture.